Skip to main content
Fig. 5 | Journal of the European Optical Society-Rapid Publications

Fig. 5

From: Enhancement and reproducibility of high quality factor, one-dimensional photonic crystal/photonic wire (1D PhC/PhW) microcavities

Fig. 5

Simulation results obtained using a 3D FDTD approach for analysis corresponding to the measured results obtained in Fig. 7- where high Q-factor values were obtained for N = 6, with NTI = 4 and (a) NTO = 0, FWHM ~ 6 pm, (b) NTO = 3, FWHM ~ 4 pm (c) NTO = 4, FWHM ~ 2 pm, at a resonance wavelength of approximately 1498.338 nm. Inset is the second resonance excited at the wavelength of approximately 1340 nm

Back to article page