Skip to main content
Fig. 2 | Journal of the European Optical Society-Rapid Publications

Fig. 2

From: Enhancement and reproducibility of high quality factor, one-dimensional photonic crystal/photonic wire (1D PhC/PhW) microcavities

Fig. 2

3D FDTD calculation results for NTI = 4 and Lc = 400 nm - showing the variation of the optical transmission and Q-factor values for: (a) different numbers of periodic mirror holes, without any tapering outside the cavity - and (b) for N = 4, with different numbers of aperiodic holes in the taper section used outside the cavity, NTO in conjunction with the taper design shown in Fig. 1

Back to article page